Cedar Bradwell Garage Door Timber Cedar Timber Sectional Doors

The UK's No. 1 Website for Garage Doors

Knowledgeable, professional and reliable advice,
services and installation since 1986.

 

Buy a

Garage Door

 

Read our guides

to select the right

garage door

 

Read our guides

to select the right

garage door


 
 
 
 
 
 
 
 

Cedar Bradwell

 

 
Manufacturer:
Timber Cedar
Door Type:
Sectional Doors
Material:
Timber
Prices from:
£ 4650

A variation of the Tudor style, this door will ideally suit period properties

To make an enquiry about this product, please click the button "Make an enquiry" below this message, or call 0800 525 442

 

 
  • description
  • Specification
  • Colours
  • Care and Warranty

BRADWELL – Arched Elegance with Period Detail

The Bradwell introduces a graceful curved top panel that brings a refined, architectural character to the cedar sectional range. Drawing inspiration from traditional carriage house designs, this model features a distinctive arched top section set within solid cedar stiles and rails, creating an elegant focal point that suits period properties and high-end new builds alike.

Like the Hassop, the Bradwell is designed for properties that demand decorative sophistication, but adds the unique visual appeal of a curved panel arrangement. The sectional construction maintains all the practical benefits of modern track technology while the carefully detailed cedar frame delivers a premium, furniture-grade finish that significantly enhances kerb appeal and property value.

Hand-built in the UK using kiln-dried timber and traditional joinery techniques including mortice and tenon joints, the Bradwell combines authentic craftsmanship with contemporary convenience. The door operates smoothly throughout its life whether finished in a natural woodstain or a factory-applied opaque colour, providing a stable, secure entrance that requires minimal maintenance.

Sizes, Operation & Gear

✓ Made to measure in a wide range of single and double sizes to suit most UK garages, including larger openings

✓ Solid cedar top, middle, side and bottom rails, typically 44mm thick overall panel construction

✓ Doors over approximately 10 ft wide are reinforced with lateral timber or steel bracing to minimise flex

✓ Vertical lifting sectional operation maximises drive-through width and headroom compared with traditional up-and-over doors

✓ HOME-X residential extension spring system as standard on most doors up to around 14'0" x 7'0" and 130 kg

✓ HOME-R rear mounted torsion springs available for heavier doors up to approximately 165 kg

✓ HOME-F front mounted torsion springs offered for large or oversize doors up to around 295 kg where extra lifting power is required

Timber Quality & Construction

✓ Hand-built in the UK from kiln dried Western Red Cedar sourced from certified, sustainably managed forests with full chain-of-custody traceability

✓ Solid cedar stiles and rails joined using traditional mortice and tenon, glued and wedged joints for maximum strength and longevity

✓ Cedar's natural oils offer inherent resistance to decay and insect attack, ideal for exposed external applications

✓ Dimensionally stable timber that lies flat and stays straight when correctly finished and maintained

✓ Natural variation in colour and grain from light amber to deep honey brown ensures every door is unique

Glazing & Design Options (where applicable)

✓ 4 mm toughened safety glass used in glazed sections for strength and impact resistance

✓ Stippled opaque glass available where privacy is important but natural daylight is still desired

✓ Leaded patterns offered in plain, diamond or square designs to match property style

✓ Clear glazing options available on request

Hardware, Security & Automation

✓ Residential track system with precision-engineered rollers designed for smooth, quiet operation

✓ Compatible with a wide range of quality electric operators for convenient remote-controlled opening and closing

✓ Multi-point locking arrangements and robust steel track components provide secure protection

✓ Optional handle and hardware finishes to coordinate with other external door furniture

✓ Standard black T-handle or upgrade to Euro locking handles in Antique Brass, Black, Brass, Chrome, or Aluminium finishes

Environmental & Certification Benefits

✓ Manufactured using certified timber with full chain-of-custody traceability back to sustainable forest sources

✓ Natural thermal and acoustic benefits thanks to cedar's cellular structure and low density

✓ Cedar's durability and long service life provide a premium, long-term solution that enhances property value and kerb appeal

Handle Options

Cedar sectional garage doors are suppliedAll Cedar Doors are also available with the following high quality handles:

Standard Black
'T' Handle

Euro Locking
Antique Brass

Euro Locking
Black

Euro Locking
Brass

Euro Locking
Chrome

Euro Locking
Aluminium

BRADWELL – Specification

✓ Premium sectional timber door with distinctive curved top panel for architectural elegance.

✓ Constructed from kiln-dried Western Red Cedar with solid framing and decorative arched detailing.

✓ Graceful arched panel design suited to period properties and high-end installations requiring decorative sophistication.

✓ Mortice and tenon, glued and wedged joints used on all main framework components for maximum structural integrity.

✓ Designed with section thicknesses and bracing appropriate to wider and taller garage openings.

✓ Manufactured as a made-to-measure product for both single and double doors.

✓ Utilises a universal sectional track system with a choice of extension or torsion spring gear.

✓ Safe, finger-protection panel joints and continuous seals to the head and jambs.

Factory Finishing Options

✓ Pre-treated with a Light Oak dip-coat base.

✓ Full factory finishing available in Standard Stains: Light Oak, Medium Oak, Golden Oak, Dark Oak, Mahogany, Rosewood, Teak, Walnut, and Black (RAL 9005).

✓ Standard Opaque Colours: Anthracite (RAL 7016), Jet Black (RAL 9005), Traffic White (RAL 9016), Pure White (RAL 9010), Cream (RAL 9001), Light Ivory (RAL 1015), Slate Grey (RAL 7015), Window Grey (RAL 7040), Agate Grey (RAL 7038), Pale Green (RAL 6021), Pigeon Blue (RAL 5014), and Ruby Red (RAL 3003).

✓ Custom colour matching for RAL, BS, Farrow & Ball, and Little Greene paints.

Cedar Sectional Door Colour Options

Enhance the natural beauty of your handmade timber door with our professional factory finishing service. Using premium Remmers coatings from Germany, our multi-coat system provides a durable, satin-finish barrier against the elements, significantly extending maintenance intervals compared to site-applied stains.

Why Choose Factory Finishing?

✓ Long-Lasting Protection: The industrial application ensures deep penetration and a consistent seal, offering up to 5 years of erosion resistance before recoating is typically required.

✓ Weather Resistance: Protects against UV degradation, water ingress, and fungal attack from day one.

✓ Superior Finish: A smooth, furniture-grade satin finish that highlights the timber grain (on translucent stains) or provides a flawless solid colour (on opaque finishes).

✓ Stability: Opaque finished doors may utilise high-performance Tricoya composite panels in place of solid cedar boards to eliminate natural movement and prevent paint cracking.

Standard Translucent Woodstains

These semi-transparent stains are designed to enrich the natural grain and tonal variation of Western Red Cedar.

✓ Light Oak - A pale, natural tone that keeps the timber looking close to raw cedar. (Translucent Stain)

✓ Medium Oak - A classic warm mid-brown that suits most traditional properties. (Translucent Stain)

✓ Golden Oak - A rich, honey-toned finish that highlights the grain contrast. (Translucent Stain)

✓ Dark Oak - A deeper, more mature brown for a distinguished look. (Translucent Stain)

✓ Mahogany - A reddish-brown finish that mimics exotic hardwoods. (Translucent Stain)

✓ Rosewood - A deep, dark red-brown with a luxurious feel. (Translucent Stain)

✓ Teak - A warm, golden-brown hue associated with tropical timber. (Translucent Stain)

✓ Walnut - A very dark, chocolate brown for a modern or heritage contrast. (Translucent Stain)

✓ Ebony / Black - A translucent black stain (RAL 9005 equivalent) that allows grain texture to show. (Translucent Stain)

Standard Opaque Colours (Solid Paint Finish)

A selection of popular solid colours that completely cover the timber grain for a uniform, modern appearance.

✓ Anthracite Grey (RAL 7016) - Dark, modern grey. Very popular for contemporary homes.

✓ Jet Black (RAL 9005) - Deep, true black.

✓ Traffic White (RAL 9016) - A bright, clean white.

✓ Pure White (RAL 9010) - A softer, standard white.

✓ Cream (RAL 9001) - A warm, buttery off-white.

✓ Light Ivory (RAL 1015) - A classic heritage cream.

✓ Slate Grey (RAL 7015) - A mid-to-dark grey with a slight blue undertone.

✓ Window Grey (RAL 7040) - A mid-grey often used on window frames.

✓ Agate Grey (RAL 7038) - A soft, light grey.

✓ Pale Green (RAL 6021) - A calming, sage-like green.

✓ Pigeon Blue (RAL 5014) - A muted, grey-blue tone.

✓ Ruby Red (RAL 3003) - A deep, rich red.

Bespoke Colour Matching

If you have a specific shade in mind, we can colour-match your garage door to coordinate perfectly with your front door, windows, or architectural features.

✓ RAL Classic & RAL Design charts

✓ British Standard (BS) colours

✓ Farrow & Ball paints

✓ Little Greene paints

Timber is a natural material with inherent variations in texture and absorption. Slight variations in colour and sheen may occur. We recommend requesting a physical timber sample for critical matches.


Light Oak

Medium Oak

Golden Oak

Dark Oak

Mahogany

Rosewood

Teak

Ebony

Walnut

Warranty & Care Instructions

Natural Timber Characteristics

Timber is an organic material that naturally acclimatises to its environment. As such, some variation in colour and grain is to be expected—this is a celebrated feature of Western Red Cedar, not a defect. Every effort is made to hand-match components during manufacture to harmonise the overall appearance.

Please be aware that timber substrates can naturally expand and contract with changes in humidity and temperature. This may result in the opening and closing of joints or minor curvature. Such movement is normal and will not affect the long-term performance or life of the door.

Finishing & Protection

Standard Basecoat : All timber doors are supplied with a dip immersion coat of Remmers Light Oak (ref: 006). This provides temporary protection for transit and installation only. If left exposed to rain or water splashes, water marks may occur. We strongly recommend applying a full specification of finishing coats immediately after installation using a Remmers Finishing coat system.

Factory Fully Finished Option: For the best long-term protection, we advise selecting the full factory finish. This multi-coat system provides up to a 5-year erosion period.

Note on Curing : If a factory-finished door is exposed to rain shortly after installation, light-coloured staining may appear. This is a normal part of the curing process and will disperse and disappear as the finish fully hardens (taking up to six months).

Colour Selection: Care should be taken when choosing dark colours for south-facing doors or locations in constant sunlight. Dark finishes can lead to excessive heat uptake, potentially causing abnormal distortion or moisture extraction from the timber.

Storage Prior to Installation

  • If your door is not being installed immediately, it must be stored correctly to maintain its warranty:

  • Store the door in an upright position, protected from weather and site contamination.

  • Keep the polythene shrink-wrap protection intact until you are ready to apply coatings.

  • Do not store the door in direct sunlight or expose it to water contamination.

Quality Check & Visual Inspection

A strict quality control check is carried out before supply, but we ask customers to perform their own visual inspection in natural daylight prior to installation.

To inspect your door correctly, stand 3 metres (10 feet) away to view the overall appearance. The door is considered acceptable if none of the following are readily visible from this distance:

Marks or distortion from manufacturing.

  • Minor indentations, scuffs, or paint/stain blemishes.

  • Vertical and lateral deflection up to 1" (25mm) on doors up to 8ft, and up to 2½" (60mm) on doors up to 16ft.

Any anomalies must be reported to The Garage Door Centre within 48 hours of receipt.

Warranty Limitations

As a specialist supplier, The Garage Door Centre facilitates the manufacturer's warranty. However, liability cannot be accepted for naturally occurring phenomena such as:

  • Colour variations or fading.

  • Natural movement (lateral or longitudinal).

  • Splitting, shakes, or resin exudation.

  • Water ingress/exit damage if maintenance instructions have not been followed.

For full warranty terms or advice on maintaining your cedar door, please contact our team at The Garage Door Centre.

Trade & Professionals
Request a Callback
X

Request a Callback