Home »
Hormann Garage Doors
The Garage Door Centre are an original approved specialist supplier, stockist and installer for Hormann Garage Doors, Entrance Doors and Electric Operator Equipment and also supply a comprehensive range of garage doors and automated gate systems from all other major manufacturers.
Installations are controlled from our dedicated office and showrooms in Northamptonshire, Warwickshire, and Bedfordshire, where our engineers are specially trained to ensure that your new Hormann garage door is the perfect fit.
Hormann Up & Over Steel Garage Doors
Hormann produce the highest quality galvanised steel garage doors available with all the pressing and assembling from a dedicated factory in Germany. The component parts are shipped to Leicestershire to be assembled into complete garage doors which are fully prepared to install, the handle being the only part fitted on site after fixing the door and gear to the structural opening. All parts on a Hormann up and over garage door are either zinc or galvanised unlike other manufacturers, ensuring long life and smooth operation.
Vertical |
Horizontal |
Chevron |
Georgian |
Marquess |
Kingston |
Countess |
Ilkley |
Caxton |
Style 914 |
Style 941 |
Style 957 |
Style 972 |
Style 975 |
Style 984 |
Style 985 |
Style 41 |
Style 45 |
Style 62 |
Horizontal |
Georgian |
Marquess |
Open for Infill |
GRP Garage Doors
Hormann GRP (fibreglass) garage doors are produced using the tried and tested steel "open for infill" system which then has a high quality GRP panel inserted and secured into it. This system ensures no warping can occur like on some GRP garage doors when there are large temperature changes or exposure to sun over a period of time. The range has a choice of factory finished woodgrain colours and smooth white gloss finishes as well as window options in some of the designs. A range of standard sizes are available with or without an optional box section steel sub frame for installation.
Windermere |
Coniston |
Stamford |
Penhurst |
Hartfield |
Livingstone |
Bourton |
Burford |
Moreton |
Woodstock |
Timber Garage Doors
Just like the GRP doors the timber up and over range use the steel box section chassis system as the basis for a very high quality product. The preferred timber for longevity and flexibility in colour staining is Cedarwood and this is the timber used for the entire range. Cedarwood is also light in weight which helps ensure a good range of sizes that are effortless to operate. The timber garage doors are supplied as standard with a clear basecoat stain for on site finishing but can be factory finished in a choice of colours. Again the steel box section fixing sub frame is available on all sizes in canopy or retractable gear options.
Burbage |
Caxton |
Chevron |
Garage Light |
Gatcombe |
Horizontal |
Chesterfield |
Jacobean |
Leicester |
Middleton |
Mallory Vertical |
Mallory Horizontal |
Measham |
Rutland |
Shepshed |
Tudor |
Vertical |
Coachman |
UPVC Garage Doors
The Dorchester is a very high quality UPVC garage door available in several single sizes only. It is a classic 12 panel "Georgian" design and has a very low maintenance smooth finish panel surface. This product will look good for a very long time if cleaned regularly and has all the benefit again of the steel chassis system that the brand produce so well.
Dorchester |
Hormann Sectional Garage Doors
LTE40 - Non-Insulated Doors
The Hormann LTE 40 range is a very competitive range of single skinned steel sectional doors produced in a vast range of sizes up to 16 feet wide. You may well find some of the sizes are in fact lower priced than an equivalent up and over door and considering all the benefits you gain buying one of these would be a very wise investment.
Options are available for the colours but white is the factory standard. All the products can be manual or remote control electrically operated using one of the many Hormann electric operators available.
Small Panel |
Medium Panel |
Small Ribbed |
Medium Ribbed |
LPU40 - Double Skinned Insulated Garage Doors
The Hormann LPU 40 range is the flagship range of sectional garage doors. The 42mm thick, foam filled, double skinned steel panels produce a product of incredible strength with insulation and sealing properties that struggle to be matched by any other type. The double skinned insulated doors are available up to 7 metres wide and 3 metres high!! Choice of colours, finishes, panel designs, windows, standard or purpose made sizes and designer stainless steel elements that also match the entrance and side door ranges for a perfect coordination on any home.
Medium Panel |
Large Panel |
Small Ribbed |
Medium Ribbed |
Large Ribbed |
Style 454 |
Style 450 |
Style 451 |
Style 452 |
Style 453 |
Style 461 |
Classic Panel |
Small Panel |
Medium Ribbed |
Built-In Door |
EPU40 - Double Skinned Insulated Doors
The Hormann EPU 40 sectional doors offer a limited range of styles using a 20mm double skinned steel panel construction. This gives excellent insulation and strength and more importantly value for money.
The EPU 40 double skinned insulated doors are only offered in the woodgrain finish and paint finishes from a large choise of colours. They are available up to 5 metres wide and 3 metres high in standard and purpose made sizes.
Small Panel |
Medium Panel |
LTH40 - Timber Garage Doors
The LTH 40 timber sectional doors are manufactured in Germany to very high standards using only the highest quality timber sourced from renewable supplies. The 2 timber available are either Hemlock or Nordic Pine and apart from the standard designs shown it is possible to have a bespoke design using the computer routing facility. A composite timber panel is cut into with a special cutting machine to create your very own design as required.
Available up to 5 metres wide.
|